Datamax E-Class Mark II Manual do Utilizador

Setting up a Datamax E-4205e1. L oad the ticket stock • Unlock the printhead and lift it so it is vertical.• Push the stock to the left side.• Pu

• Now, you need to know something. You need to know where the print driver is. This may be on the original Wintix CD. You may want to download and ins

• Select the model of printer.• The drivers get copied.• You need to know what printer port the printer gets connected to.

• Give the printer a name that makes sense to you.• No, you do not want the ticket printer to be the default printer.• The default printer needs to be

Datamax Troubleshooting1. Turn the printer on. Does it have a green light?2. Press the Feed button. Does it advance 5½” and stop with a green light? P

2. Install the printer driverStart by clicking on the “Add printer” icon• You will not find Datamax listed in the list of printers. Click on the “Hav

3. Setup (After you have installed the printer driver)• Right click on this icon and select “Printing preferences”.• Set the stock size to be “Mul

Two more important settings to check are SOP Emulation and Present Sensor:SOP Emulation• While in the Datamax driver, do a right click under Propertie

Present Sensor• Again, while in the Datamax driver, do a right click under Properties.• Select Features tab. • Check to make sure “Present Sensor” is

Setting up a Windows printer with Wintix• Select Windows printer (standard) Yes, that’s right – even though you are using a Datamax.• Click on this bu

Some notes: 1. If your logo is upside down, DON’T PANIC. You probably have the stock in backwards. Take the stock out, turn the stack upside down, a

8. Occasionally, a printer will need to be reset to factory defaults. To do this, turn the printer off. Then, hold down F1 and F3 while turning it on.

Why would you bother with all this complication? Speed and reliability. Using the Datamax as a text based printer will save you about 1½ seconds per t